PRODUCTS
Showing 1–20 of 33 results
Mobile application for fine-tuning the ActiveAhead 2018 solution. Allows configuration of a single luminaire, group- or network of luminaires.
Application for configuring and adjusting Helvar’s ActiveAhead solution. Used for managing parameters, grouping, connecting wall panels, and more.
Android application to test ActiveAhead luminaires at the end of the luminaire production line.
Extremely small multisensor for use with ActiveAhead Nodes, enabling unique self-learning capabilities. Can be used inside a luminaire together with an ActiveAhead Node, or outside a luminaire, through ActiveAhead Node Advanced with a circular sensor holder.
- Super small multisensor to connect to an ActiveAhead Node
- Mount to luminaire frame or with a holder accessory
- Prefixed cable
ActiveAhead Control Unit DA converts DALI luminaires into wireless ActiveAhead enabled luminaires. The ActiveAhead Control Unit DA has a pre-programmed software to continuously learn and operate the luminaire accordingly. ActiveAhead control units form a low-energy Bluetooth mesh network through which they share information; e.g., on the detected changes in their vicinity. ActiveAhead Control Unit DA does not work with the ActiveAhead Generation 2 products.
- Converts DALI luminaires into wireless ActiveAhead luminaires
- Placed inside or outside of luminaire
- Continuously learns about changes in the vicinity
- Connects to Bluetooth low energy mesh network
REPLACED BY 5609 ActiveAhead Node Advanced. Extends ActiveAhead capabilities to standard DALI luminaires. Super easy to install ActiveAhead Node Advanced converts DALI luminaires into wireless ActiveAhead enabled luminaires. It operates the luminaires according to continuous learning and optionally configured settings. ActiveAhead Nodes form a low-energy Bluetooth Mesh network through which they share information; e.g., on the detected changes in their vicinity.
- Converts DALI luminaires into wireless ActiveAhead luminaires
- Easy installation thanks to the inbuilt DALI power supply unit and strain reliefs
- Continuously learns about changes in the vicinity
- Connects to the Bluetooth Mesh network
Compact luminaire-based unit that combines a processor, radio, multi sensor and connecting cable into one single product. Connects a luminaire to the wireless Helvar ActiveAhead solution.
- Connects with Freedom LED drivers or with ActiveAhead Adapter DA
- Small size with multiple options to assemble into a luminaire
- Continuously learns and adapts to changes in space usage
- Radio antenna outside the luminaire body
The ActiveAhead wireless networking capable control unit has a pre-programmed software to continuously learn and operate the luminaire accordingly. ActiveAhead control units form a low-energy Bluetooth mesh network through which they share information e.g., on the detected changes in their vicinity. ActiveAhead Control Unit does not work with the ActiveAhead Generation 2 products.
- Continuously learns about changes in the vicinity
- Keeps the lighting at ideal level
- Connects to Bluetooth low energy mesh network
- ActiveAhead Cable connects the LED driver to the Control Unit. ORDERS: 150 mm (5698), or 300 mm (5699)
Batten mounted IP65 rated sensor for use with ActiveAhead Nodes in rough environments such as parking garages. Installed inside an ActiveAhead luminaire together with an ActiveAhead Node.
- Multi sensor to connect to an ActiveAhead Node in rough environments
- Batten mount to a luminaire
- Prefixed cable
Enables DALI LED drivers to be used in a wireless ActiveAhead luminaire. Connects and powers an ActiveAhead Node.
- Powers up to 4 DALI LED drivers
- Compatible with ActiveAhead Node Sense and ActiveAhead Node
Small and powerful ActiveAhead Node that connects a luminaire to the wireless Helvar ActiveAhead solution.
- Connects with Freedom LED drivers or with ActiveAhead Adapter DA
- Small size with multiple options to assemble into a luminaire
- When equipped with a sensor, continuously learns and adapts to changes in space usage
Mounting accessory for the 5630 ActiveAhead Sense multisensor. Mount the sensor in a rectangular hole on an ActiveAhead luminaire, or, for example, to the side of the luminaire.
Mounting accessory for the 5634 ActiveAhead Node Sense multisensor. Mount the unit in a rectangular hole on an ActiveAhead luminaire, or, for example, to the side of the luminaire.
Connects DALI luminaires, sensors and wall panels to the wireless Helvar ActiveAhead solution.
- Broad range of compatible products for meeting diverse application requirements
- Easy installation with inbuilt DALI power supply unit and strain reliefs
- Assigns addresses to connected devices to control individual luminaire output levels
- When equipped with a sensor, continuously learns and adapts to changes in space usage
Sends data from a Helvar ActiveAhead wireless system to the Helvar Insights cloud platform. A site may require multiple ActiveAhead Controllers. Always sold as part of the Helvar Insights offering.
- Preconfigured for easy installation
- Secure connection
Mounting accessory to mount the 5630 ActiveAhead Sense multisensor to a recessed ceiling.
Mounting accessory to mount the 5634 ActiveAhead Node Sense multisensor to a recessed ceiling.
IP65 rated multisensor for use with ActiveAhead Nodes, enabling unique self-learning capabilities. Follows the Zhaga Book 20 mechanical dimensions for a rectangular sensor suiting a 44×17 mm slot.
- Small IP65 rated luminaire-based multisensor for the ActiveAhead solution
- Can be mounted to a rectangular 44x17 mm luminaire slot following the Zhaga Book 20 mechanical dimensions
- Connect to the ActiveAhead Node using a Freedom connecting cable length of choice
- Batten mount using a holder accessory
High bay IP65 rated multisensor for use with ActiveAhead Nodes. Follows the Zhaga Book 20 mechanical dimensions for a rectangular sensor suiting a 60×22 mm slot.
- Small high bay luminaire-based sensor for the ActiveAhead solution
- Can be mounted to a rectangular 60x22 mm luminaire slot following the Zhaga Book 20 mechanical dimensions
- Connect to the ActiveAhead Node using a Freedom connecting cable length of choice
- Batten mount using a holder accessory
Area sensor with inbuilt radio and DALI power supply unit for the wireless Helvar ActiveAhead solution. Connects a space with DALI luminaires, sensors and wall panels to the solution.
- Connects DALI devices to the wireless Helvar ActiveAhead solution
- Easy installation with inbuilt DALI power supply unit
- Assign addresses to connected devices to control individual luminaire output levels
- Continuously learns and adapts to changes in space usage