454 4 × 2.2 A Transistor Dimmer

454 4 × 2.2 A Transistor Dimmer

The Helvar 454 is 4-channel trailing edge dimmer suitable for capacitive, resistive loads, low voltage lamps with electronic transformers and some mains-dimmable LED. The dimmer is a DIN-rail mounted unit that can control a maximum load of 500 W per channel.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
    RoomSet
  • Sistema de control de iluminación: DALI lighting control
  • Device Mounting Method: DIN rail
Datasheet

Specifications

Características

Selectable leading or trailing edge dimming
Suitable for mains-dimmable LED loads
Voltage and frequency compensation
Over temperature protection

Técnico

Dimensiones

160 mm × 91 mm × 62 mm

Número de canales

4

Carga máx. / canal (A)

2.2

Fuente de alimentación nominal

85 VAC – 264 VAC (absolute) 45 Hz – 65 Hz

Order code Description
454 4 X 2.2A Trailing / Leading Edge Dimmer

You May Also Like

The Helvar 452 unit is a single-channel universal dimmer, suitable for leading or trailing-edge loads including mains-dimmable LED. The dimmer is a DIN-rail mounted unit that can control a maximum load of 1000 W. It has an out-of-box operation functionality.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
    RoomSet
  • Sistema de control de iluminación: DALI lighting control
  • Device Mounting Method: DIN rail
Read more Datasheet

The 342 Acoustic Sensor combines audible and infrasound detectors in one single component as an active part in lighting control. This audible sound sensor is used for near field presence/ movement detection and the infrasound detector is for recognizing e.g. the opening of a door, within the allocated range. The sensor is ideal for enclosed spaces such as corridors, stairwells and single floor parking garage. The 342 is also suited for areas that may require a large number of PIR sensors or that are difficult to equip using traditional movement sensors. Being an acoustic sensor it can be set up out of the line of sight.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
  • Sistema de control de iluminación: DALI lighting control
  • Device Mounting Method: Independent
  • Sensor Mounting Method: 
    Ceiling
    Wall
  • Colour: White
Read more Datasheet

Single channel relay unit, designed to allow interfacing with other building control and management systems. The relay is a solid-state, normally open signal relay, with a contact rating of 60 VAC or VDC, at a maximum of 0.5 A. The unit forms a DALI relay node with a typical current consumption of 10 mA and is programmable as a single relay unit using Designer and Toolbox Helvar lighting control software.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
    RoomSet
  • Sistema de control de iluminación: DALI lighting control
  • Device Mounting Method: Independent
Read more Datasheet