492 16 A Power Relay Unit
492 16 A Power Relay Unit
Single channel relay unit, designed to allow control of non-DALI, non-dimmable loads. The relay is latching, volt-free contact, able to withstand high inrush and with a contact rating of 16A. The unit forms a DALI relay node with a typical current consumption of 2mA and programmable using both Designer and Toolbox Helvar lighting control software.
- Valaistuksenohjausratkaisu:
ActiveAhead
Imagine
RoomSet - Valaistuksenohjausjärjestelmä: DALI lighting control
- Device Mounting Method: Independent
Ominaisuudet
| Allows control of switched loads |
|---|
| For integration in luminaires or use in electrical cabinets |
| High-inrush specification relay |
| Secure strain relief |
Tekninen
| Mitat | 118 mm × 40 mm × 21.2 mm |
|---|---|
| Kanavien määrä | 1 |
| Order code | Description | Electric id |
|---|---|---|
| 492 | Relay-Unit-16A-DALI Powered | 2602095 |
You May Also Like
Extremely small multisensor to be used with the ActiveAhead Nodes. Offers the ActiveAhead Nodes eyes to detect changes which enable the unique ActiveAhead self-learning. Can be used inside an ActiveAhead luminaire together with the ActiveAhead Node or outside luminaires with the ActiveAhead Node Advanced together with the circular sensor holder.
- Valaistuksenohjausratkaisu: ActiveAhead
- Valaistuksenohjausjärjestelmä: Wireless lighting control
- Device Mounting Method: Luminaire
- Sensor Mounting Method: Luminaire
- Colour:
White
Anthracite grey
Single channel relay unit, designed to allow interfacing with other building control and management systems. The relay is a solid-state, normally open signal relay, with a contact rating of 60 VAC or VDC, at a maximum of 0.5 A. The unit forms a DALI relay node with a typical current consumption of 10 mA and is programmable as a single relay unit using Designer and Toolbox Helvar lighting control software.
- Valaistuksenohjausratkaisu:
ActiveAhead
Imagine
RoomSet - Valaistuksenohjausjärjestelmä: DALI lighting control
- Device Mounting Method: Independent
Connects DALI luminaires and system sensors to the truly intelligent wireless lighting control solution ActiveAhead. Super easy to install. Select luminaires and possible other products based on the space needs. Starts working the moment it is powered on and is user friendly to configure. Learns continuously from its surroundings and operates the luminaires accordingly. ActiveAhead Nodes form a scalable low-energy Bluetooth Mesh network through which they share information; e.g., on the detected changes in their vicinity.
- Valaistuksenohjausratkaisu: ActiveAhead
- Valaistuksenohjausjärjestelmä: Wireless lighting control
- Device Mounting Method: Independent