PRODUCTS
Showing 81–100 of 126 results
4-channel transistor dimmer suitable for leading- or trailing edge loads. Maximum load 500 W per channel.
- Suitable for mains-dimmable LED loads
- Selectable leading- or trailing edge dimming
- Voltage and frequency compensation
- Over temperature protection
8-channel universal dimmer, suitable for leading- or trailing edge dimming.
- Suitable for mains-dimmable LED loads
- For leading- or trailing edge dimming of resistive and inductive loads
- LED display for local control and monitoring
- Flicker-free dimming
Provides a simple interface for a Helvar DALI system and allows lighting system data to be integrated to a Building Management System using a BACnet or Modbus protocol. Note: Only one protocol can be used at a time and is chosen during configuration.
- BACnet IP or Modbus TCP/IP compatible
- Browser-accessible programming interface
- DIN-rail mountable
Enables a hybrid lighting solution with ActiveAhead and Imagine solutions. Makes chosen ActiveAhead groups visible on the Imagine system.
- Control ActiveAhead solution from the Imagine solution
- Get occupancy data from ActiveAhead to the Imagine 945 / 950 DALI-2 solution
- Easy to install and setup
The Helvar Cloud Gateway (HCG) Gen 2 connects a wired Helvar Imagine Lighting Control System to the Helvar Insights platform. It is always sold as part of the Helvar Insights offering.
- Connection to the Helvar Insights cloud-based digital services
- Preconfigured for easy installation
- Secure connection
- Over the air updates
Sends data from a Helvar ActiveAhead wireless system to the Helvar Insights cloud platform. A site may require multiple ActiveAhead Controllers. Always sold as part of the Helvar Insights offering.
- Preconfigured for easy installation
- Secure connection
Niagara 4 compatible driver with a feature-rich graphical user interface. Allows for integrations and connectivity with other building systems.
- Communication via Niagara Tridium software driver
- Can run on Tridium JACE hardware or software
- Automatic discovery of routers, devices and groups
Allows connection of wireless and battery-less EnOcean controls to a Helvar DALI lighting network.
- Simple installation with mounting on ceiling or walls
- Powered by DALI network
- Up to 20 switches can be integrated per gateway
DALI-2 certified input device which allows for third-party, volt-free input integration with a Helvar lighting control system. For use with devices such as switches, alarms and time clocks.
- Fits into all standard size back boxes
- 4 volt-free inputs
Allows for third-party, volt-free input integration with a Helvar lighting control system for devices such as switches, alarms and time clocks.
- Fits into all standard size back boxes
- 4 volt-free inputs
Allows for third-party, volt-free input integration with a Helvar lighting control system. For use with other building systems, or devices such as switches, alarms and time clocks.
- Status LED shows current operational mode
- 8 volt-free switch inputs
- Physical selection switch
- Programmable using Helvar Toolbox and Designer software
Allows two-way communications between a RS-232 port and a Helvar DALI lighting system.
- Bi-directional serial interface for basic system monitoring and control
- Status LED
- 4 kV isolation between DALI and the RS232 port
Compact interface that allows third-party switches or button panels with indicator LEDs to be connected to a Helvar lighting control system.
- Fits into most standard size back boxes
- 4 volt-free switch inputs
- 4 LED outputs for indicator LEDs
Allows third-party occupancy sensors to be connected with a Helvar lighting control system.
- Fits into the wiring space inside a sensor
- Includes 12 V DC supply to power the sensor
- Programmable using Helvar Toolbox and Designer software
Allows control of electronic ballasts that comply with 1-10 V and DSI® protocols.
- Switch for manual DALI group selection
- Status LED
4-channel ballast controller suitable for electronic ballasts and LED drivers.
- 4 individually programmable outputs with a relay per output
- Multiple output configurations: 0–10 V / 1–10 V / DALI Broadcast / DSI
- Manual configuration via LED display and push-buttons
8-subnet DALI controller for LED drivers. For use when individual LED driver addressing is not required.
- Control using DALI Broadcast messages on each subnet
- Integrated DALI Power Supply supports up to 512 DALI devices
- Lamp failure reporting on subnet level
- DALI / SDIM / DMX control inputs
8-channel LED driver and ballast controller for control of loads up to 6 A per channel.
- Manual configuration via LED display and push-buttons
- Can control 0–10 V, 1–10 V, DSI®, DALI Broadcast and PWM loads
- Input interface for DALI and SDIM/DMX
250 mA DIN-rail mounted power supply unit for Helvar DALI systems.
- Status LED for fault indication
- Short circuit and over temperature protected