494 4 × 10 A Relay Unit

494 4 × 10 A Relay Unit

DALI compatible interface for incorporating non-dimmable loads in DigiDim systems. 494 is DIN-rail mounted and can control four individually programmable relays. The relays are normally open, volt-free and can switch resistive loads up to 10 A.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
    RoomSet
  • Lighting control protocol: DALI lighting control
  • Device Mounting Method: DIN rail
Datasheet

Specifications

Features

4 Individually programmable relays, normally open and volt-free
Relays are internally isolated permitting separate phases to be controlled in one unit
Manual override

Technical

Размеры

88 mm × 90 mm × 58 mm

Количество каналов

4

Номинальные характеристики источника питания

197 VAC – 264 VAC (absolute) 48 Hz – 65 Hz

Order code Description
494 Digidim-Four-Relay-Unit

You May Also Like

The 321D2 Multisensor is a DALI-2 certified version of the 321 Multisensor, which combines a light sensor for constant light control and a passive infrared (PIR) presence detector to provide energy-saving functions in a DALI system. The light sensor measures reflected light from the surface directly beneath it, using this information to maintain a constant light level by adjusting the lamp outputs. The PIR sensor enables the Multisensor to switch the lights on when its coverage area is occupied, and off when it is unoccupied.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
  • Lighting control protocol: DALI-2 lighting control
  • Sensor Mounting Method: Ceiling
  • Colour: 
    White
    Anthracite grey
Read more Datasheet

The Helvar 454 is 4-channel trailing edge dimmer suitable for capacitive, resistive loads, low voltage lamps with electronic transformers and some mains-dimmable LED. The dimmer is a DIN-rail mounted unit that can control a maximum load of 500 W per channel.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
    RoomSet
  • Lighting control protocol: DALI lighting control
  • Device Mounting Method: DIN rail
Read more Datasheet

The 342 Acoustic Sensor combines audible and infrasound detectors in one single component as an active part in lighting control. This audible sound sensor is used for near field presence/ movement detection and the infrasound detector is for recognizing e.g. the opening of a door, within the allocated range. The sensor is ideal for enclosed spaces such as corridors, stairwells and single floor parking garage. The 342 is also suited for areas that may require a large number of PIR sensors or that are difficult to equip using traditional movement sensors. Being an acoustic sensor it can be set up out of the line of sight.

  • Lighting Control Solution: 
    ActiveAhead
    Imagine
  • Lighting control protocol: DALI lighting control
  • Device Mounting Method: Independent
  • Sensor Mounting Method: 
    Ceiling
    Wall
  • Colour: White
Read more Datasheet