498 8 × 16 A Relay Unit
498 8 × 16 A Relay Unit
The 498 DigiDim relay is an 8-channel relay unit with high inrush relays rated at 16 A per channel. The unit has the ability to handle sudden high-peak inrush currents due to switching on loads. 498 can be networked through DALI or SDIM to work with DigiDim & Imagine control systems.
- Lighting Control Solution:
ActiveAhead
Imagine
RoomSet - Lighting control protocol: DALI lighting control
- Device Mounting Method: DIN rail
Features
| 8 Individually programmable relays, normally open and volt-free |
|---|
| High-inrush specification relays |
| Wired Override input |
| Manual configuration via LED display and push buttons |
Technical
| Boyutlar | 160 mm × 90 mm × 58 mm |
|---|---|
| Kanal sayısı | 8 |
| Güç beslemesi oranı | 85 VAC – 264 VAC (absolute) 45 Hz – 65 Hz |
| Order code | Description |
|---|---|
| 498 | 8-Channel-Relay-Unit-With-Sdim-And-DALI |
You May Also Like
The 321 Multisensor combines a light sensor for constant light control and a passive infrared (PIR) presence detector to provide energy-saving functions in a DALI system. The light sensor measures reflected light from the surface directly beneath it, using this information to maintain a constant light level by adjusting the lamp outputs. The PIR sensor enables the Multisensor to switch the lights on when its coverage area is occupied, and off when it is unoccupied.
- Lighting Control Solution:
ActiveAhead
Imagine
RoomSet - Lighting control protocol: DALI lighting control
- Sensor Mounting Method: Ceiling
- Colour:
White
Anthracite grey
Single-channel thyristor dimmer, suitable for leading edge loads and some mains-dimmable LED. The dimmer is a DIN rail mounted unit that can control a maximum load of 500 W. It has out-of-box operation functionality.
- Lighting Control Solution:
ActiveAhead
Imagine
RoomSet - Lighting control protocol: DALI lighting control
- Device Mounting Method: DIN rail
The 342 Acoustic Sensor combines audible and infrasound detectors in one single component as an active part in lighting control. This audible sound sensor is used for near field presence/ movement detection and the infrasound detector is for recognizing e.g. the opening of a door, within the allocated range. The sensor is ideal for enclosed spaces such as corridors, stairwells and single floor parking garage. The 342 is also suited for areas that may require a large number of PIR sensors or that are difficult to equip using traditional movement sensors. Being an acoustic sensor it can be set up out of the line of sight.
- Lighting Control Solution:
ActiveAhead
Imagine - Lighting control protocol: DALI lighting control
- Device Mounting Method: Independent
- Sensor Mounting Method:
Ceiling
Wall - Colour: White