select the weather

• August 31, 2023

DALI compatible pushbutton modular control panels. Each module is fitted with indicator LEDs and an infrared receiver for remote operation. The panels enables the selection of a task appropriate illuminance level and colour temperature scene from four pre-programmed scenes that aids the user’s circadian rhythms.

• August 31, 2023

The DIGIDIM S-DIM Converter combines the flexibility of DIGIDIM controllers with the power of Imagine and Ambience dimmers. All loads in an S-DIM system are converted to DIGIDIM addresses and can thus be viewed and programmed with the DIGIDIM Toolbox software. A system can consist of both DIGIDIM pushbuttons and DALI loads as well as dimmers connected via converters. An S-DIM Converter can convert up to 16 S-DIM addresses to DALI. If more than 16 S-DIM channels are needed, additional converters can be connected. The converter also has a built-in DALI power supply that can be selected to be used.

• August 31, 2023

Intelligentes und einfach zu bedienendes Energiesparthermostat. Hört auf ActiveAhead-Nodes und schaltet je nach Belegung des Raums in der Nähe zwischen ECO- und Komforttemperatur um.

• August 31, 2023

The ActiveAhead wireless networking capable control unit has a pre-programmed software to continuously learn and operate the luminaire accordingly. ActiveAhead control units form a low-energy Bluetooth mesh network through which they share information e.g., on the detected changes in their vicinity. ActiveAhead Control Unit does not work with the ActiveAhead Generation 2 products.

• März 1, 2024

The Helvar Cloud Gateway (HCG) Gen 2 connects a wired Helvar Imagine Lighting Control System to the Helvar Insights platform. It is always sold as part of the Helvar Insights offering.

• August 31, 2023

ActiveAhead Control Unit DA converts DALI luminaires into wireless ActiveAhead enabled luminaires. The ActiveAhead Control Unit DA has a pre-programmed software to continuously learn and operate the luminaire accordingly. ActiveAhead control units form a low-energy Bluetooth mesh network through which they share information; e.g., on the detected changes in their vicinity. ActiveAhead Control Unit DA does not work with the ActiveAhead Generation 2 products.

• August 31, 2023

The iDim Studio software consists of two software packages: iDim Studio Editor and iDim Studio Runtime. The iDim Studio Editor is mainly designed for customised programming of the iDim Sense.The iDim Studio Runtime provides a graphical user interface for the iDim remote desktop mimic

• August 31, 2023

The 311P Ceiling PIR Detector is an IP55 certified version of the 311 Ceiling PIR Detector, a compact unit that provides energy-saving functions in a DALI system. It contains a Passive infrared detector (PIR) and an Infrared receiver. As a presence detector, the unit can turn the lights on when a room is occupied, and off when the room is unoccupied.

• August 31, 2023

REPLACED BY 5609 ActiveAhead Node Advanced. Extends ActiveAhead capabilities to standard DALI luminaires. Super easy to install ActiveAhead Node Advanced converts DALI luminaires into wireless ActiveAhead enabled luminaires. It operates the luminaires according to continuous learning and optionally configured settings. ActiveAhead Nodes form a low-energy Bluetooth Mesh network through which they share information; e.g., on the detected changes in their vicinity.

• August 31, 2023

The 311 Ceiling PIR Detector is a compact unit that provides energy-saving functions in a DALI system. It contains a Passive infrared detector (PIR) and an Infrared receiver. As a presence detector, the unit can turn the lights on when a room is occupied, and off when the room is unoccupied.