select the weather

• agosto 31, 2023

DALI compatible pushbutton modular control panels. Each module is fitted with indicator LEDs and an infrared receiver for remote operation. The panels enables the selection of a task appropriate illuminance level and colour temperature scene from four pre-programmed scenes that aids the user’s circadian rhythms.

• agosto 31, 2023

Find the right driver for the right light source in your application! LEDesign is an intuitive tool that gives assistance in designing optimum combinations of Helvar LED modules and drivers, or even custom LED modules. Using LED module’s main input data, the LEDesign tool automates the selection process for compatible LED modules and LED drivers from Helvar’s wide range. LEDesign shows the key electrical and photometrical parameters for the selected combination and indicates whether the LEDs are under or overdriven. What’s more, the tool can also be programmed to display an efficiency graph of the selected LED load, showing how well it will perform. Additionally, the tool allows for very simple energy comparison against traditional light sources.

The regularly updated mobile application for Android and iOS users is easy to use online or offline. LEDesign is also available as a browser version at ledesign.helvar.com and for Windows® PC as a desktop version.

• agosto 31, 2023

Intelligent and easy-to-use energy saving thermostat. Listens to ActiveAhead Nodes and toggles between ECO and Comfort temperatures according to nearby space occupancy.

• agosto 31, 2023

The DIGIDIM S-DIM Converter combines the flexibility of DIGIDIM controllers with the power of Imagine and Ambience dimmers. All loads in an S-DIM system are converted to DIGIDIM addresses and can thus be viewed and programmed with the DIGIDIM Toolbox software. A system can consist of both DIGIDIM pushbuttons and DALI loads as well as dimmers connected via converters. An S-DIM Converter can convert up to 16 S-DIM addresses to DALI. If more than 16 S-DIM channels are needed, additional converters can be connected. The converter also has a built-in DALI power supply that can be selected to be used.

• agosto 31, 2023

Helvar Driver Configurator is a tool for advanced parameter setting of Helvar DALI LED Drivers, Helvar Tunable White iC LED Drivers, and Freedom LED Drivers. Product-specific configurations can be created and tested with Helvar Driver Configurator. Helvar Driver Configurator allows you to set LED module parameters for Helvar iC LED drivers to ensure proper operation during colour temperature and light intensity control. The tool can also configure other LED driver parameters, like output current, DALI parameters, CLO and a variety of other features depending on the Helvar DALI LED driver model. Programming supports NFC and DALI line configuration. When programming via the DALI line, one great feature is an automatic programming mode, which can be used in luminaire manufacturing, or programming driver parameters automatically in installation with up to 64 drivers connected in the DALI subnet. Also, the possibility to program drivers with command prompt commands and an option to use external software to command programming of drivers makes the Helvar LED Driver configuration process more efficient. For optimal NFC programming flow, a separate NFC Production Programmer tool is available.

• agosto 31, 2023

The ActiveAhead wireless networking capable control unit has a pre-programmed software to continuously learn and operate the luminaire accordingly. ActiveAhead control units form a low-energy Bluetooth mesh network through which they share information e.g., on the detected changes in their vicinity. ActiveAhead Control Unit does not work with the ActiveAhead Generation 2 products.

• marzo 1, 2024

The Helvar Cloud Gateway (HCG) Gen 2 connects a wired Helvar Imagine Lighting Control System to the Helvar Insights platform. It is always sold as part of the Helvar Insights offering.

• agosto 31, 2023

ActiveAhead Control Unit DA converts DALI luminaires into wireless ActiveAhead enabled luminaires. The ActiveAhead Control Unit DA has a pre-programmed software to continuously learn and operate the luminaire accordingly. ActiveAhead control units form a low-energy Bluetooth mesh network through which they share information; e.g., on the detected changes in their vicinity. ActiveAhead Control Unit DA does not work with the ActiveAhead Generation 2 products.

• agosto 31, 2023

The 311P Ceiling PIR Detector is an IP55 certified version of the 311 Ceiling PIR Detector, a compact unit that provides energy-saving functions in a DALI system. It contains a Passive infrared detector (PIR) and an Infrared receiver. As a presence detector, the unit can turn the lights on when a room is occupied, and off when the room is unoccupied.

• agosto 31, 2023

The iDim Studio software consists of two software packages: iDim Studio Editor and iDim Studio Runtime. The iDim Studio Editor is mainly designed for customised programming of the iDim Sense.The iDim Studio Runtime provides a graphical user interface for the iDim remote desktop mimic