460 DigiDim S-DIM Converter (Discontinued)
460 DigiDim S-DIM Converter (Discontinued)
The DIGIDIM S-DIM Converter combines the flexibility of DIGIDIM controllers with the power of Imagine and Ambience dimmers. All loads in an S-DIM system are converted to DIGIDIM addresses and can thus be viewed and programmed with the DIGIDIM Toolbox software. A system can consist of both DIGIDIM pushbuttons and DALI loads as well as dimmers connected via converters. An S-DIM Converter can convert up to 16 S-DIM addresses to DALI. If more than 16 S-DIM channels are needed, additional converters can be connected. The converter also has a built-in DALI power supply that can be selected to be used.
- The converter can control up to 16 S-Dim addresses
- The unit can be programmed to 16 different light scenes per address according to the DALI standard. Factory default on delivery makes converter instantly controllable with DALI standard Broadcast commands
- Last light level after power outage
| Lighting Control Solution | Imagine |
|---|---|
| Lighting Control Protocol | DALI lighting control |
| Device Mounting Method | Independent |
You May Also Like
8-channel LED driver and ballast controller for control of loads up to 6 A per channel.
- Manual configuration via LED display and push-buttons
- Can control 0–10 V, 1–10 V, DSI®, DALI Broadcast and PWM loads
- Input interface for DALI and SDIM/DMX
Allows control of electronic ballasts that comply with 1-10 V and DSI® protocols.
- Switch for manual DALI group selection
- Status LED
8-subnet DALI controller for LED drivers. For use when individual LED driver addressing is not required.
- Control using DALI Broadcast messages on each subnet
- Integrated DALI Power Supply supports up to 512 DALI devices
- Lamp failure reporting on subnet level
- DALI / SDIM / DMX control inputs