498 8 × 16 A Relay Unit
498 8 × 16 A Relay Unit
The 498 DigiDim relay is an 8-channel relay unit with high inrush relays rated at 16 A per channel. The unit has the ability to handle sudden high-peak inrush currents due to switching on loads. 498 can be networked through DALI or SDIM to work with DigiDim & Imagine control systems.
- Valaistuksenohjausratkaisu:
ActiveAhead
Imagine
RoomSet - Valaistuksenohjausjärjestelmä: DALI lighting control
- Device Mounting Method: DIN rail
Ominaisuudet
| 8 Individually programmable relays, normally open and volt-free |
|---|
| High-inrush specification relays |
| Wired Override input |
| Manual configuration via LED display and push buttons |
Tekninen
| Mitat | 160 mm × 90 mm × 58 mm |
|---|---|
| Kanavien määrä | 8 |
| Syöttöjännite | 85 VAC – 264 VAC (absolute) 45 Hz – 65 Hz |
| Order code | Description | Electric id |
|---|---|---|
| 498 | 8-Channel-Relay-Unit-With-Sdim-And-DALI | 2602074 |
You May Also Like
The 321 Multisensor combines a light sensor for constant light control and a passive infrared (PIR) presence detector to provide energy-saving functions in a DALI system. The light sensor measures reflected light from the surface directly beneath it, using this information to maintain a constant light level by adjusting the lamp outputs. The PIR sensor enables the Multisensor to switch the lights on when its coverage area is occupied, and off when it is unoccupied.
- Valaistuksenohjausratkaisu:
ActiveAhead
Imagine
RoomSet - Valaistuksenohjausjärjestelmä: DALI lighting control
- Sensor Mounting Method: Ceiling
- Colour:
White
Anthracite grey
The 322 High-Bay Multisensor is a compact unit that provides energy-saving functions in DALI applications where mounting heights are too high for standard sensors, such as warehouses and factories. Sealed with a gasket that protects it from dust and water, this IP65 sensor is designed to be recessed in a ceiling void or in a luminaire construction.
- Valaistuksenohjausratkaisu:
ActiveAhead
Imagine - Valaistuksenohjausjärjestelmä: DALI lighting control
- Device Mounting Method: Independent
- Sensor Mounting Method:
Ceiling
High-bay - Colour:
White
Anthracite grey
Single channel relay unit, designed to allow interfacing with other building control and management systems. The relay is a solid-state, normally open signal relay, with a contact rating of 60 VAC or VDC, at a maximum of 0.5 A. The unit forms a DALI relay node with a typical current consumption of 10 mA and is programmable as a single relay unit using Designer and Toolbox Helvar lighting control software.
- Valaistuksenohjausratkaisu:
ActiveAhead
Imagine
RoomSet - Valaistuksenohjausjärjestelmä: DALI lighting control
- Device Mounting Method: Independent