Shop Header

PRODUCTS

Viser 1–10 av 275 resultater


Small and powerful ActiveAhead Node Sense combines processor, radio, multi sensor and connecting cable all into one single product. Connect to a Freedom LED driver or to an ActiveAhead Adapter DA. Makes luminaire design and assembly easy while offering excellent radio signal quality out from the luminaire. Operates the luminaire according to continuous learning and optionally configured settings. ActiveAhead Nodes form a scalable low-energy Bluetooth Mesh network through which they share information; e.g., on the detected changes in their vicinity.
  • Product family: ActiveAhead
  • Mounting: Luminaire
  • PIR motion sensor, Light Sensor
Datasheet
Helvar Freedom Node Casambi wireless lighting control
  • Use with Helvar Freedom Drivers to create wirelessly controllable luminaire solution with Casambi control system
  • Freedom Interface 1.5 communication from Driver to Node
  • Tiny mechanics to fit into linear luminaires
  • Strain-relief for independent installation
Datasheet
  • Typical luminous flux (4000K @Tp) [lm]: 2020
  • Typical efficacy (4000K @Tp) [lm/W]: 170
  • Nominal operating current [mA]: 600
  • Typical forward voltage (4000K @Tp) [V]: 19,8
  • Size: 23.8 × 559.8 x 6.2 mm
  • Initial colour consistency: 3 MacAdam steps
  • Colour rendering index, min.: 80
Datasheet
  • NEDLADDNINGAR OCH LÄNKAR
  • ELEKTRISK

    • Maximum operating current [mA]: 800
    • IP rating: IP00

  • EGENSKAPER

    • Maximum temperature at Tc point [°C]: 80
    • Operating temperature range: –20…+50 °C, Tp = Tc 65 °C
    • Lifetime up to (h): 50000

  • OPTISK

    • Beam angle [°]: 120
    • Colour temperature: Tunable white, 2700 K, 3000 K, 3500 K, 4000 K, 5000 K, 6500 K
    • Risk Group: 1

  • DALI controllable electronic ballast
  • Input voltage: 220 V – 240 V
  • Lamp type: T5 (14 W / 21 W / 28 W / 35 W), T5-eco (14 W / 21 W / 28 W / 35 W), TC-L (26 W / 28 W)
  • Lifetime up to (h): 50000
  • Dimming range: 1 % – 100 %
  • Warm start
Download catalogue
  • Plastic-encased and robust resistors for adjusting the LED driver current output
  • Compact size to fit inside strain reliefs
  • Basic isolated
  • Helvar LED-Iset resistors are adjusted to follow the LEDset current/resistance settings values
  • Suitable only for LED-Iset or LEDset drivers
Datasheet
Helvar LEDesign LED design and calculation tool
Find the right driver for the right light source in your application! LEDesign is an intuitive tool that gives assistance in designing optimum combinations of Helvar LED modules and drivers, or even custom LED modules. Using LED module’s main input data, the LEDesign tool automates the selection process for compatible LED modules and LED drivers from Helvar’s wide range. LEDesign shows the key electrical and photometrical parameters for the selected combination and indicates whether the LEDs are under or overdriven. What’s more, the tool can also be programmed to display an efficiency graph of the selected LED load, showing how well it will perform. Additionally, the tool allows for very simple energy comparison against traditional light sources. The regularly updated mobile application for Android and iOS users is easy to use online or offline. LEDesign is also available as a browser version at ledesign.helvar.com and for Windows® PC as a desktop version.
  • This innovative accessory enables independent installation of compatible 30 mm wide metal case LED drivers with NFC antenna
  • Easy installation
  • Sturdy structure, compatible with cables of different thickness
  • Please see the datasheet for application guidance
Datasheet
LDL-562 LEDiL DAISY compatible neutral white linear LED module
  • Typical luminous flux (4000K @Tp) [lm]: 3700
  • Typical efficacy (4000K @Tp) [lm/W]: 145
  • Nominal operating current [mA]: 1200
  • Typical forward voltage (4000K @Tp) [V]: 21,2
  • Size: 23.8 × 559.8 x 4.3 mm
  • Initial colour consistency: 3 MacAdam steps
  • Colour rendering index, min.: 80
Datasheet
  • NEDLADDNINGAR OCH LÄNKAR
  • ELEKTRISK

    • Maximum operating current [mA]: 1400
    • IP rating: IP00

  • EGENSKAPER

    • Maximum temperature at Tc point [°C]: 80
    • Operating temperature range: –20…+50 °C, Tp = Tc 65 °C
    • Lifetime up to (h): 43000

  • OPTISK

    • Beam angle [°]: 120
    • Colour temperature: 4000 K
    • Risk Group: 1

  • Typical luminous flux (4000K @Tp) [lm]: 1110
  • Typical efficacy (4000K @Tp) [lm/W]: 180
  • Nominal operating current [mA]: 450
  • Typical forward voltage (4000K @Tp) [V]: 13,7
  • Size: 23.8 × 279.8 x 6.2 mm
  • Initial colour consistency: 3 MacAdam steps
  • Colour rendering index, min.: 80
Datasheet
  • NEDLADDNINGAR OCH LÄNKAR
  • ELEKTRISK

    • Maximum operating current [mA]: 600
    • IP rating: IP00

  • EGENSKAPER

    • Maximum temperature at Tc point [°C]: 85
    • Operating temperature range: –20…+50 °C, Tp = Tc 65 °C
    • Lifetime up to (h): 50000

  • OPTISK

    • Beam angle [°]: 120
    • Colour temperature: Tunable white, 2700 K, 3000 K, 3500 K, 4000 K, 5000 K, 6500 K
    • Risk Group: 1

  • DALI controllable electronic ballast
  • Input voltage: 220 V – 240 V
  • Lamp type: T5 (14 W / 21 W / 28 W / 35 W), T5-eco (14 W / 21 W / 28 W / 35 W), TC-L (26 W / 28 W)
  • Lifetime up to (h): 50000
  • Dimming range: 1 % – 100 %
  • Warm start
Download catalogue